====== FLDIGI ======

===== COMPILATION FROM SOURCES (LINUX) ======

  * Sources https://sourceforge.net/projects/fldigi/files/
  * GIT repo https://sourceforge.net/p/fldigi/fldigi/ci/master/tree/
  * Packages & Libs needed :
    * libfltk1.3-compat-headers libfltk1.3-dev
    * pkg-config
    * libpng-dev
    * libsamplerate0-dev
    * libsndfile1-dev
    * portaudio19-dev
    * libhamlib++-dev
    * libudev-dev
  * Check the FLTK version: <code bash>$ fltk-config --version</code>
  * Check if ''sources/config.h'' is set to the correct values according to FLTK version values :<code cpp>
    /* FLTK API major version */
    #define FLDIGI_FLTK_API_MAJOR 1
    /* FLTK API minor version */
    #define FLDIGI_FLTK_API_MINOR 3
    /* FLTK API patch */
    #define FLDIGI_FLTK_API_PATCH 4</code>
  * ''./configure''
  * ''make''

===== REMOTE CONTROL =====
==== 🡆 PYFLDIGI ====
=== APPLICATIONS AND INTENDED USAGE ===
  * Remote weather stations.
  * Portable HF setups. Typically, HF digital setups are bulky and require several interconnected pieces of hardware, usually via audio cables. This library, along with some custom hardware, could allow a walkie-talkie sized HF digital radio that's completely integrated.
  * Emcomm
  * 'Headless' operation on a Raspberry Pi, BeagleBone, or any number of other Linux-based single-board computers.
  * Putting a more 'user-friendly' GUI on top of FLdigi.
  * Web enabled FLDIGI via HTML5 and some Javascript, that could be accessed from anywhere. Python's Flask / Django along with Bootstrap, and a few REST calls, for example.
  * Allow a phone or tablet to send and receive FLDIGI messages via a custom app. There is an Android version of FLDIGI, but that might not be the best approach for every problem. A more custom application could be created to use only a particular mode and send pre-formatted data, for example, with considerably less work than it would be to fork the FLDIGI mobile application and update it.

=== SOURCE ===
  * https://github.com/KM4YRI/pyFldigi

===== "HEADLESS" FLDIGI =====
<code bash>ssh -L 7362:localhost:7362 remote-host xvfb-run fldigi -display :99</code>

===== FLDIGI AS MODEM =====
//(for packet-radio for example)//

==== FLDIGIATTACH ====
  * https://github.com/la5nta/fldigiattach

==== ANDROID VERSION ====
  * {{ :documentation:hamradio:modes_numeriques:softwares:fldigi:andflmsg_v1.5.0-20210812.apk |AndFLmsg v. 1.5.0}}