{{:documentation:microcontroleurs:stm32:stm32-blue-pill_01.jpg?400&nolink}}
====== STM32 "BLUEPILLS" ======

{{:index_01.png?64|}}
<catlist -exclupage -sortAscending -hideNotFoundMsg -columns:1 -maxDepth:1 -noHead -noAddPageButton>
----

===== 🔵 Documentation =====
  * {{ :documentation:microcontroleurs:stm32:stm32_-_reference_manual.pdf |Manuel de Référence}}
  * {{ :documentation:microcontroleurs:stm32:stm32_-_application_notes.pdf |Applications Notes}}
  * {{ :documentation:microcontroleurs:stm32:stm32_-_stm32f0xxx_cortex-m0_programming_manual.pdf |Programming Manual}}
  * {{ :documentation:microcontroleurs:stm32:stm32_-_stm32f030x4x6x8xc_device_errata.pdf |Device Errata}}

===== 🔵 Littérature =====
  * {{ :documentation:microcontroleurs:stm32:discovering_the_stm32_microcontroller.pdf |Discovering the STM32 Microcontroller}}
  * {{ :documentation:microcontroleurs:stm32:getting_started_with_stm32_mcu_discovery_kits.pdf |Getting started with STM32 MCU Discovery Kits}}
  * {{ :documentation:microcontroleurs:stm32:getting_stated_with_the_stm32_nucleo_board.pdf |Getting stated with the STM32 Nucleo Board Kits}}
  * {{ :documentation:microcontroleurs:stm32:stm32hitexrefmanual.pdf |STM32 HitEx Reference Manual}}
  * {{ :documentation:microcontroleurs:stm32:beginning_stm32.pdf |Beginning STM32}}

===== 🔵 CONNECTING TO / FLASHING WITH LINUX =====

==== ➡️ USB ISP LINUX / USB ASP ====
  * {{ :documentation:microcontroleurs:stm32:arduino_how-to-fix-a-usb-isp-programmer-and-make-it-work-with-arduino-ide-on-linux_wiki.fryktoria.com_.pdf |}} = make it an USB ASP 😄

  * DFU MODE : Connect a USB-C cable and the board should power ON. Force the board into DFU mode by keeping the BOOT0 switch pressed while pressing and releasing the NRST switch.

==== ➡️ SWD ====

==== ➡️ UART ====

==== ➡️ USB ====

==== ➡️ SPI ====