Différences

Ci-dessous, les différences entre deux révisions de la page.

--- documentation:electronique:modules_kits:controleurs_pwm:index [2020/02/22 23:04] – créée f1sls
+++ documentation:electronique:modules_kits:controleurs_pwm:index [2024/05/14 12:40] (Version actuelle) – [12V~36V @ « 5A »] f1sls
@@ Ligne 1: / Ligne 1: @@
 ====== Contrôleurs PWM ======
-===== 10~60 V =====
+===== 4.5V~36V @ « 5A »=====
-{{:documentation:electronique:modules_kits:controleurs_pwm:39c9efbb357cca28.jpg?400|}}
+{{:documentation:electronique:modules_kits:controleurs_pwm:pwm_3-35v_5a_01.jpg?400|}}
-VCC positive supply 10-60V, be sure to set before energizing voltage adaptation
+\\
-GND Negative , if you want to reduce the external interference shielding box connected to terminals or here at the cathode connected to the power supply
+{{:documentation:electronique:modules_kits:controleurs_pwm:pwm_3-35v_5a_02.jpg?400|}}
-M+ Motor positive
+\\
-M- motor negative
+{{:documentation:electronique:modules_kits:controleurs_pwm:pwm_3-35v_5a_03.jpg?400|}}
-Length: 9.5cm width: 7cm height: 3.5cm Length of line: 40cm
+\\
-Control port :
+{{:documentation:electronique:modules_kits:controleurs_pwm:pwm_3-35v_5a_04.jpg?400|}}
-V: driver board internal 5V power supply, the output capacity of less than 100mA, with potentiometer mode is recommended only to use , do not drive other circuits
+\\
-PWM: external PWM control signal input level range ,3-20V , 2mA current requirements ;
+{{:documentation:electronique:modules_kits:controleurs_pwm:pwm_3-35v_5a_05.jpg?400|}}
-ADJ: external 0-5V or 0-10V control signal input
+\\
-GND: ground control signals , such as the shield shell is not allowed to pick pick here is also not allowed in this place other circuits connected GND,
+  * Working voltage : DC4.5V-35V
-DOWN: control signal, the internal coupler control signal and GND effective turn ( optocoupler turns on, can also be used microcontroller , NPN switch control )
+  * Output current: 0-5A
-UP: control signal, the internal coupler control signal and GND effective turn ( optocoupler turns on, can also be used microcontroller , NPN switch control )
+  * Output power: 90W (maximum)
-STOP: control signal, the internal coupler control signal and GND effective turn ( optocoupler turns on, can also be used microcontroller , NPN switch control )
+  * Quiescent current: 7µA (standby state)
+  * PWM duty cycle: 1%-100%
+  * PWM frequency: 20khz
+  * Size: length 30MMx width 26MM (without handle) x height 14MM
+  * Weight: 0.013KG
+  * Precautions:
+    * The DC motor governor input is DC, and it can't be directly connected to AC (for example: household 220V AC), otherwise it will burn out! ! !
+    * Do not reverse the positive and negative terminals of the DC power supply, otherwise the governor may be damaged.
+    * The motor can be positive or negative. When the running direction is inconsistent with the expectation, the direction can be changed by adjusting the line sequence.
+    * Adjusting the potentiometer knob changes the governor output duty cycle and the motor speed changes.
+===== 12V~36V @ 3A=====
+{{:documentation:electronique:modules_kits:controleurs_pwm:4fad037d1ddad825.jpg?400|}}
+\\
+{{:documentation:electronique:modules_kits:controleurs_pwm:pwm_12-36v_3a_english.jpeg?400|}}
+\\
+  * Input voltage: DC12V - 36V
+  * Sustained current:3A,max.6A(Need to add a cooling fan when max. current)
+  * PWM Duty Cycle:0 -100%
+  * PWM Frequency:500KHz
+  * Material: Plastic, metal
+  * Size (L*W*H):56mm*36mm*22mm
+===== 10V~60V @ 20A=====
+{{:documentation:electronique:modules_kits:controleurs_pwm:4717cc1e5ade6f47.jpg?400|}}
+\\
+  * Operating voltage: DC 10V-60V
+  * Output Current: 0 to 20A.
+  * Frequency：25KHz.
+  * Continuous power: Max 1200W
+  * Speed range: Motor zero speed to maximum motor speed
+  * The maximum current up to 20A radiator or heat required to increase the fan
+  * Material: Plastic, metal
+  * Size (L*W*H):76mm*44mm*26mm
+===== 6V~60V @ 30A=====
+{{:documentation:electronique:modules_kits:controleurs_pwm:7bd08b9272bbad71.jpg?400|}}
+\\
+  * Input Voltage: DC6V-60V
+  * Output Voltage: Linear with load(voltage drop at motor 2 terminals )
+  * Output Current: 0A-30A
+  * Continuous Current: <20A
+  * Speed Range: 0% to 100%(variable)
+  * Regulation Method: Potentiometer(Linear)
+  * Regulation Type: Regulating Current(cannot be used as a voltage regulator)
+  * Control Frequency: 15KHz(pulse width)
+  * Wiring Type: Screw terminal
+  * Rotary Knob: 100K with switch(270°)
+  * Size: 75 x 56 x 28mm / 2.95 x 2.2 x 1.1"

Outils pour utilisateurs

Outils du site

Différences

Outils de la page