Outils pour utilisateurs
Contrôleurs PWM
Ceci est une ancienne révision du document !
Contrôleurs PWM
10V~60V @ 20A
- Operating voltage: DC 10V-60V
- Output Current: 0 to 20A.
- Frequency：25KHz.
- Continuous power: Max 1200W
- Speed range: Motor zero speed to maximum motor speed
- The maximum current up to 20A radiator or heat required to increase the fan
- Material: Plastic, metal
- Size (L*W*H):76mm*44mm*26mm
6V~60V @ 30A
- VCC positive supply 10-60V, be sure to set before energizing voltage adaptation
- GND Negative , if you want to reduce the external interference shielding box connected to terminals or here at the cathode connected to the power supply
- M+ Motor positive
- M- motor negative
- Length: 9.5cm width: 7cm height: 3.5cm Length of line: 40cm
- Control port :
- 5V: driver board internal 5V power supply, the output capacity of less than 100mA, with potentiometer mode is recommended only to use , do not drive other circuits
- PWM: external PWM control signal input level range ,3-20V , 2mA current requirements ;
- ADJ: external 0-5V or 0-10V control signal input
- GND: ground control signals , such as the shield shell is not allowed to pick pick here is also not allowed in this place other circuits connected GND,
- DOWN: control signal, the internal coupler control signal and GND effective turn ( optocoupler turns on, can also be used microcontroller , NPN switch control )
- UP: control signal, the internal coupler control signal and GND effective turn ( optocoupler turns on, can also be used microcontroller , NPN switch control )
- STOP: control signal, the internal coupler control signal and GND effective turn ( optocoupler turns on, can also be used microcontroller , NPN switch control )
documentation/electronique/modules_kits/controleurs_pwm/index.1582409583.txt.gz · Dernière modification : de f1sls
Outils de la page
Sauf mention contraire, le contenu de ce wiki est placé sous les termes de la licence suivante : CC Attribution-Share Alike 4.0 International
