Ceci est une ancienne révision du document !
Contrôleurs PWM
12V~36V @ « 5A »
Working voltage : DC4.5V-35V
Output current: 0-5A
Output power: 90W (maximum)
Quiescent current: 7µA (standby state)
PWM duty cycle: 1%-100%
PWM frequency: 20khz
Size: length 30MMx width 26MM (without handle) x height 14MM
Weight: 0.013KG
Precautions:
The DC motor governor input is DC, and it can't be directly connected to AC (for example: household 220V AC), otherwise it will burn out! ! !
Do not reverse the positive and negative terminals of the DC power supply, otherwise the governor may be damaged.
The motor can be positive or negative. When the running direction is inconsistent with the expectation, the direction can be changed by adjusting the line sequence.
Adjusting the potentiometer knob changes the governor output duty cycle and the motor speed changes.
12V~36V @ 3A
Input voltage: DC12V - 36V
Sustained current:3A,max.6A(Need to add a cooling fan when max. current)
PWM Duty Cycle:0 -100%
PWM Frequency:500KHz
Material: Plastic, metal
Size (L*W*H):56mm*36mm*22mm
10V~60V @ 20A
Operating voltage: DC 10V-60V
Output Current: 0 to 20A.
Frequency:25KHz.
Continuous power: Max 1200W
Speed range: Motor zero speed to maximum motor speed
The maximum current up to 20A radiator or heat required to increase the fan
Material: Plastic, metal
Size (L*W*H):76mm*44mm*26mm
6V~60V @ 30A
Input Voltage: DC6V-60V
Output Voltage: Linear with load(voltage drop at motor 2 terminals )
Output Current: 0A-30A
Continuous Current: <20A
Speed Range: 0% to 100%(variable)
Regulation Method: Potentiometer(Linear)
Regulation Type: Regulating Current(cannot be used as a voltage regulator)
Control Frequency: 15KHz(pulse width)
Wiring Type: Screw terminal
Rotary Knob: 100K with switch(270°)
Size: 75 x 56 x 28mm / 2.95 x 2.2 x 1.1“