Différences

Ci-dessous, les différences entre deux révisions de la page.

--- documentation:hamradio:ax25:flexnet:index [2022/08/18 00:38] – [Installing PC/FlexNet] f1sls
+++ documentation:hamradio:ax25:flexnet:index [2022/08/18 01:32] (Version actuelle) – f1sls
@@ Ligne 1: / Ligne 1: @@
-{{:documentation:hamradio:ax25:flexnet:rmnc_node.jpg?400|}}
+{{:documentation:hamradio:ax25:flexnet:flexlogo.jpg?direct|}}
-====== RMNC (RHEIN MAIN NETWORK CONTROLLER) FLEXNET ======
+====== RMNC (RHEIN MAIN NETWORK CONTROLLER) & PC/ FLEXNET ======
 ===== DOCUMENTATION =====
   * {{ :documentation:hamradio:ax25:flexnet:dcc1995-flexnet-dk7wj-n2irz.pdf |An Introduction to FlexNet ‒ Gunter Jost (DK7WJ) FlexNet Gruppe Darmstadt & Donald Rotolo (N2IRZ) Radio Amateur Telecommunications Society ‒ TAPR DCC 1995}}
+  * {{ :documentation:hamradio:ax25:flexnet:iapc_06_digis.pdf |Commandes du RMNC FlexNet Version 3.3f ‒ IAPC, Genève, Suisse }} // ➜ https://www.iapc.ch //
@@ Ligne 34: / Ligne 35: @@
 Before you decide to build a digipeater using PC/FlexNet now, you should think about the following: The RMNC is still the preferred platform for FlexNet, and something that does not work there will not work on the PC either, except from some bagatelles. The user shall find a uniform and well known (from the RMNCs) user interface. Who prefers the optimum of reliability and performance for minimal costs and maintenance should use the RMNC.
-//Source: http://www.torborg.com/ka2dew/packet/flexnet/manual/pc_flexnet.htm//
+//Source: http://www.torborg.com/ka2dew/packet/flexnet/manual/pc_flexnet.htm //

Outils pour utilisateurs

Outils du site

Différences

Outils de la page