ALINCO DJ-X11 []

Cette page est en lecture seule. Vous pouvez afficher le texte source, mais ne pourrez pas le modifier. Contactez votre administrateur si vous pensez qu'il s'agit d'une erreur.

{{documentation:hamradio:radios:alinco_djx11:djx11.svg}}
===== ALINCO DJ-X11 ======

===== DOCUMENTATION =====
  * {{ :documentation:hamradio:radios:alinco_djx11:dj-x11brochure.pdf | Alinco DJ-X11 Brochure [EN]}}
  * {{ :documentation:hamradio:radios:alinco_djx11:alo-dj-x11t.pdf | Alinco DJ-X11 Instruction Manual [EN]}}

===== SOFTWARE =====
==== CLONE ====
 * {{ :documentation:hamradio:radios:alinco_djx11:dj-x11_cloneutility_v3.04.zip |}}
==== REMOTE CONTROL ====
 * {{ :documentation:hamradio:radios:alinco_djx11:dj-x11_remote.zip |}}

===== FIRMWARE =====

===== NOTES =====
<blockquote>I have noticed this also. The problem is that it looks like that the Alinco remote control program and the cloning utility was written in Visual Basic. The runtime that programs that were distributed do not install the MSCOMM32.OCX component needed for serial communications. MSCOMM32.OCX is no longer distributed with later versions of windows. You will need to Google MSCOMM32.OCX and find a place to download it. Once you have the file you will need to do the following:

1. Copy the file to your windows/system32 directory
2. Go to the Start Menu/Accessories/Run
3. Enter regsvr32/C:/Windows/System32/MSCOMM32.OCX

The program should tell you the file was registered.

You should now be able to run the Remote Control Program and the Cloning Utility

The DJ-X11T is a great radio for the money, but still needs better software support</blockquote>

Outils pour utilisateurs

Outils du site

Outils de la page