AVRT5 / AP510 APRS TRACKER []

Cette page est en lecture seule. Vous pouvez afficher le texte source, mais ne pourrez pas le modifier. Contactez votre administrateur si vous pensez qu'il s'agit d'une erreur.
{{:documentation:hamradio:radios:avrt5:ap510.jpg?direct|}}
====== AVRT5 / AP510 APRS TRACKER ======

===== RESOURCES =====
==== DOCUMENTATION ====
  * {{ :documentation:hamradio:radios:avrt5:ap510-englishmanual-kc5eve-version20151031.pdf |Hardware and Configuration Software Documentation v. 20151031 (KC5EVE) [EN]}}
  * {{ :documentation:hamradio:radios:avrt5:avrt5_english_manual_8-19-2015.pdf |AVRT5 English Manual 2015-08-19 [EN]}} 

==== WEB ====
  * Official : http://avrtx.cn/index.php?folder=QVZSVDU=
  * https://perens.com/avrt5/
  * https://www.richardmudhar.com/blog/2018/10/sainsonic-ap510-aprs-tracker-experiments/
  * http://wa7nwp.wikidot.com/ap510

==== REMARKS ====
  * Bluetooth connection only works after GPS lock therefore you have to wait some seconds before connecting to the device. Bluetooth pairing code is 1234.
  * miniUSB connector is a Serial Port therefore the included USB cable needs to be used for programming (charging works with every standard USB cable).
===== CONFIGURATION =====
==== WINDOWS SOFTWARES ====
=== CONFIGURATION SOFTWARE ===
  * {{ :documentation:hamradio:radios:avrt5:20210404_avrt5-ap510_fix_x.zip |}}
{{:documentation:hamradio:radios:avrt5:avrt5_configuration.png?200|}}
=== CH340(G) DRIVERS ===
== XP ==
  * {{ :documentation:hamradio:radios:avrt5:ch340_xp_driver.zip |}}
== WIN 7+ ==
  * {{ :documentation:hamradio:radios:avrt5:ch340_driver.zip |}}
==== LINUX ====
  * Python Script : https://github.com/nytowl/AP510-setup

==== Serial Commands ====
<blockquote>
These serial commands are known, and can be sent on the KISS serial channel or over Bluetooth. They use a variation of the ancient Hayes Modem protocol. To send a serial command, first send the carriage-return character (control-M on many terminals). Then send the entire command, followed by another carriage-return. You should see an “OK” reply on the serial interface. You must restart the AVRT5 to see the effect of your command.
Source : https://perens.com/avrt5/advanced/
</blockquote> 

^ COMMAND               ^ DETAILS ^
| AT+CALL=callsign      | Set the callsign to be transmitted. |
| AT+FREQ=146.3900      | Set the frequency for transmission and reception. There must be 3 digits before the decimal and four after the decimal. |
| AT+BEEP=1 open/0 off  | Turn the buzzer on or off. The values must be “1 open” or “0 off”, with both the number and word there! |
| AT+STAT=message       | Set the status text. 48 characters maximum. |
| AT+COMM=message       | Set the comment text. 48 characters maximum. |
| AT+ENER=message       | Set the emergency text. 31 characters maximum. |
| AT+RX=n	        | Set the receive audio level input to the demodulator. n is one digit in the range of 1 through 9. |
| AT+TX=n               | Set the transmit deviation level. n is one digit in the range of 1 through 6. |

===== BLUETOOTH =====
The AVRT5 will be visible as a Bluetooth device called **AVRT5**. Pairing code = **1234**.

===== FIRMWARE UPDATE =====
//Firmware updates are included in the configuration software archive.//
Outils pour utilisateurs

Outils du site

Outils de la page
