Différences

Ci-dessous, les différences entre deux révisions de la page.

--- documentation:informatique:raspberrypi:infrared:index [2022/09/15 20:39] – [LIRC SEND COMMANDS] f1sls
+++ documentation:informatique:raspberrypi:infrared:index [2022/09/16 18:28] (Version actuelle) – [LIRC] f1sls
@@ Ligne 38: / Ligne 38: @@
 === Add the lines below to the file ===
 <WRAP left round important 30%>
-useless
+Useless!
-</WRAP>
 <code bash>
 lirc_dev
@@ Ligne 46: / Ligne 44: @@
 </code>
 // gpio_out_pin parameter points to the pin controlling the IR LED//
+</WRAP>
 === Edit '/etc/lirc/hardware.conf', and add ===
@@ Ligne 104: / Ligne 105: @@
 $ pronto2lirc
 </code>
+Input format: KEY_NAME:HEX_VALUE HEX_VALUE HEX_VALUE...
+===== PIGPIO =====
+<code bash>
+wget https://github.com/joan2937/pigpio/archive/master.zip
+unzip master.zip
+cd pigpio-master
+make
+sudo make install
+</code>
+<WRAP left round info 60%>
+If the Python part of the install fails it may be because you need the setup tools.
+<code bash>
+sudo apt install python-setuptools python3-setuptools
+</code>
+</WRAP>
+==== To start the pigpio daemon ====
+<code bash>sudo pigpiod</code>
+==== To stop the pigpio daemon ====
+<code bash>sudo killall pigpiod</code>
+==== github ====
+<code bash>git clone https://github.com/joan2937/pigpio</code>
+==== Raspbian (raspberrypi.org image) ====
+<code bash>
+sudo apt-get update
+sudo apt-get install pigpio python-pigpio python3-pigpio
+</code>
+<WRAP left round info 60%>
+This may not be the most recent version.  You can check the version with the command pigpiod -v.
+</WRAP>
+===== LINKS =====
+  * https://blog.bschwind.com/2016/05/29/sending-infrared-commands-from-a-raspberry-pi-without-lirc/
+  * https://git.code.sf.net/p/lirc-remotes/code

Outils pour utilisateurs

Outils du site

Différences

Outils de la page