• https://wiki.mchobby.be/index.php?title=NeoPixel-UserGuide-Arduino

• WS2811 Datasheet

• WS2812B Datasheet
• Neopixel Adafruit Library (pour tout µContrôleurs)
• Bibliothèque Polulu pour WS2812B LedStrips (Arduino)

• Documentation Adafruit
• Les matrices sont en fait des chaînes de LEDs (NeoPixels) rangées en carrés
• Arrangements des LEDs
  • Chaque ligne ou colonne complète la précédente en repartant du début = « PROGRESSIVE »
  • Les lignes / colonnes s'enchaînent du début à la fin puis de la fin au début = « ZIGZAG »
• Dans le code on indique dans quel coin est la première LED, puis l'arrangement, puis le type de LED
• On peut aussi indiquer si c'est une matrice de matrices (pour faire un truc immense !)

/**
The first two arguments — 5 and 8 — are the width and height of the matrix, in pixels. The third argument — 6 — is the pin number to which the NeoPixels are connected. On the shield this is hard-wired to digital pin 6, but standalone matrices are free to use other pins.
 
The next argument is the interesting one. This indicates where the first pixel in the matrix is positioned and the arrangement of rows or columns. The first pixel must be at one of the four corners; which corner is indicated by adding either NEO_MATRIX_TOP or NEO_MATRIX_BOTTOM to either NEO_MATRIX_LEFT or NEO_MATRIX_RIGHT. The row/column arrangement is indicated by further adding either NEO_MATRIX_COLUMNS or NEO_MATRIX_ROWS to either NEO_MATRIX_PROGRESSIVE or NEO_MATRIX_ZIGZAG. These values are all added to form a single value as in the above code.
 
NEO_MATRIX_TOP + NEO_MATRIX_RIGHT + NEO_MATRIX_COLUMNS + NEO_MATRIX_PROGRESSIVE
 
The last argument is exactly the same as with the NeoPixel library, indicating the type of LED pixels being used. In the majority of cases with the latest NeoPixel products, you can simply leave this argument off…the example code is just being extra descriptive. 
 
The point of this setup is that the rest of the sketch never needs to think about the layout of the matrix. Coordinate (0,0) for drawing graphics will always be at the top-left, regardless of the actual position of the first NeoPixel.
*/
 
Adafruit_NeoMatrix matrix = Adafruit_NeoMatrix(5, 8, 6,
  NEO_MATRIX_TOP     + NEO_MATRIX_RIGHT +
  NEO_MATRIX_COLUMNS + NEO_MATRIX_PROGRESSIVE,
  NEO_GRB            + NEO_KHZ800);