Différences

Ci-dessous, les différences entre deux révisions de la page.

--- documentation:microcontroleurs:arduino:modules:tactile_sensors:index [2021/08/02 17:46] – f1sls
+++ documentation:microcontroleurs:arduino:modules:tactile_sensors:index [2024/10/12 11:11] (Version actuelle) – [ARDUINO WIRING] f1sls
@@ Ligne 6: / Ligne 6: @@
 \\
 {{:documentation:microcontroleurs:arduino:modules:tactile_sensors:ky036_pinout.png?direct|}}
+\\
+{{:documentation:microcontroleurs:arduino:modules:tactile_sensors:ky036_drawing.png?direct|}}
 ===== ARDUINO WIRING =====
+{{:documentation:microcontroleurs:arduino:modules:tactile_sensors:ky036_arduino_wiring.png?600|}}
 ===== CODE =====
+==== EXAMPLE #1 ====
+<code cpp>
+// Arduino and KY-036 module
+void setup ()
+{
+pinMode (13, OUTPUT); // built-in LED pin set to output
+pinMode (8, INPUT); // module digital output connected to Arduino pin 8
+Serial.begin(9600); // initialize serial
+}
+void loop ()
+{
+// display analog and digital values to serial
+Serial.print("Analog pin: ");
+Serial.print(analogRead(A0));
+Serial.print(" | Digital pin: ");
+if (digitalRead(8) == HIGH) {
+Serial.println("High");
+digitalWrite (13, HIGH); // if module value is higher than threshold,
+// switch-On built-in LED
+}
+else {
+Serial.println("Low");
+digitalWrite (13, LOW);
+}
+delay(100); // wait 100 milliSeconds
+}
+</code>