Outils pour utilisateurs
Contrôleurs PWM
Différences
Ci-dessous, les différences entre deux révisions de la page.
| Les deux révisions précédentesRévision précédenteProchaine révision | Révision précédente | ||
| documentation:electronique:modules_kits:controleurs_pwm:index [2020/02/22 23:05] – f1sls | documentation:electronique:modules_kits:controleurs_pwm:index [2024/05/14 12:40] (Version actuelle) – [12V~36V @ « 5A »] f1sls | ||
|---|---|---|---|
| Ligne 1: | Ligne 1: | ||
| ====== Contrôleurs PWM ====== | ====== Contrôleurs PWM ====== | ||
| - | ===== 10~60 V ===== | + | ===== 4.5V~36V @ « 5A »===== |
| - | {{: | + | {{: |
| \\ | \\ | ||
| - | * VCC positive supply 10-60V, be sure to set before energizing | + | {{: |
| - | * GND Negative , if you want to reduce the external interference shielding box connected to terminals or here at the cathode connected to the power supply | + | \\ |
| - | * M+ Motor positive | + | {{: |
| - | * M- motor negative | + | \\ |
| - | * Length: 9.5cm width: 7cm height: | + | {{: |
| - | * Control port : | + | \\ |
| - | * 5V: driver board internal 5V power supply, the output capacity | + | {{: |
| - | * PWM: external PWM control signal input level range ,3-20V , 2mA current | + | \\ |
| - | * ADJ: external | + | * Working |
| - | * GND: ground control signals | + | * Output current: 0-5A |
| - | * DOWN: control signal, | + | * Output |
| - | * UP: control signal, the internal coupler control signal and GND effective turn ( optocoupler turns on, can also be used microcontroller , NPN switch control | + | * Quiescent current: 7µA (standby state) |
| - | * STOP: control signal, the internal coupler control signal and GND effective turn ( optocoupler turns on, can also be used microcontroller , NPN switch | + | * PWM duty cycle: 1%-100% |
| + | * PWM frequency: 20khz | ||
| + | * Size: length 30MMx width 26MM (without handle) x height | ||
| + | * Weight: 0.013KG | ||
| + | * Precautions: | ||
| + | * The DC motor governor input is DC, and it can't be directly connected to AC (for example: household 220V AC), otherwise it will burn out! ! ! | ||
| + | * Do not reverse | ||
| + | * The motor can be positive or negative. When the running direction | ||
| + | * Adjusting the potentiometer knob changes the governor output duty cycle and the motor speed changes. | ||
| + | |||
| + | ===== 12V~36V @ 3A===== | ||
| + | {{:documentation: | ||
| + | \\ | ||
| + | {{: | ||
| + | \\ | ||
| + | * Input voltage: DC12V - 36V | ||
| + | * Sustained current:3A,max.6A(Need to add a cooling fan when max. current) | ||
| + | * PWM Duty Cycle:0 -100% | ||
| + | * PWM Frequency:500KHz | ||
| + | * Material: Plastic, metal | ||
| + | * Size (L*W*H): | ||
| + | |||
| + | ===== 10V~60V @ 20A===== | ||
| + | {{: | ||
| + | \\ | ||
| + | * Operating voltage: DC 10V-60V | ||
| + | * Output Current: 0 to 20A. | ||
| + | * Frequency：25KHz. | ||
| + | * Continuous power: Max 1200W | ||
| + | * Speed range: Motor zero speed to maximum motor speed | ||
| + | * The maximum current up to 20A radiator or heat required to increase | ||
| + | * Material: Plastic, metal | ||
| + | * Size (L*W*H): | ||
| + | |||
| + | ===== 6V~60V @ 30A===== | ||
| + | {{: | ||
| + | \\ | ||
| + | | ||
| + | * Output Voltage: Linear with load(voltage drop at motor 2 terminals | ||
| + | * Output Current: 0A-30A | ||
| + | * Continuous Current: <20A | ||
| + | * Speed Range: 0% to 100%(variable) | ||
| + | * Regulation Method: Potentiometer(Linear) | ||
| + | * Regulation Type: Regulating Current(cannot | ||
| + | * Control Frequency: 15KHz(pulse width) | ||
| + | * Wiring Type: Screw terminal | ||
| + | * Rotary Knob: 100K with switch(270°) | ||
| + | * Size: 75 x 56 x 28mm / 2.95 x 2.2 x 1.1" | ||
documentation/electronique/modules_kits/controleurs_pwm/index.1582409150.txt.gz · Dernière modification : de f1sls
Outils de la page
Sauf mention contraire, le contenu de ce wiki est placé sous les termes de la licence suivante : CC Attribution-Share Alike 4.0 International
