Outils pour utilisateurs
AVRT5 / AP510 APRS TRACKER
Ceci est une ancienne révision du document !
AVRT5 / AP510 APRS TRACKER
RESOURCES
DOCUMENTATION
WEB
CONFIGURATION
WINDOWS SOFTWARE
LINUX
- Python Script : https://github.com/nytowl/AP510-setup
Serial Commands
These serial commands are known, and can be sent on the KISS serial channel or over Bluetooth. They use a variation of the ancient Hayes Modem protocol. To send a serial command, first send the carriage-return character (control-M on many terminals). Then send the entire command, followed by another carriage-return. You should see an “OK” reply on the serial interface. You must restart the AVRT5 to see the effect of your command. Source : https://perens.com/avrt5/advanced/
| COMMAND | DETAILS |
|---|---|
| AT+CALL=callsign | Set the callsign to be transmitted. |
| AT+FREQ=146.3900 | Set the frequency for transmission and reception. There must be 3 digits before the decimal and four after the decimal. |
| AT+BEEP=1 open/0 off | Turn the buzzer on or off. The values must be “1 open” or “0 off”, with both the number and word there! |
| AT+STAT=message | Set the status text. 48 characters maximum. |
| AT+COMM=message | Set the comment text. 48 characters maximum. |
| AT+ENER=message | Set the emergency text. 31 characters maximum. |
| AT+RX=n | Set the receive audio level input to the demodulator. n is one digit in the range of 1 through 9. |
| AT+TX=n | Set the transmit deviation level. n is one digit in the range of 1 through 6. |
documentation/hamradio/radios/avrt5/index.1617464498.txt.gz · Dernière modification : de f1sls
Outils de la page
Sauf mention contraire, le contenu de ce wiki est placé sous les termes de la licence suivante : CC Attribution-Share Alike 4.0 International
