Différences

Ci-dessous, les différences entre deux révisions de la page.

--- documentation:informatique:instrumentation_connectee:analyseur_logique_lht00su1:index [2019/06/10 15:34] – créée f1sls
+++ documentation:informatique:instrumentation_connectee:analyseur_logique_lht00su1:index [2019/06/10 16:03] (Version actuelle) – f1sls
@@ Ligne 1: / Ligne 1: @@
 {{:documentation:informatique:instrumentation_connectee:analyseur_logique_lht00su1:lht00su1_00.jpg?400|}}
 ====== Analyseur Logique LHT00SU1 ======
+===== Informations =====
+==== Function ====
+  * Dual input oscilloscope (single, 16Msps, 3MHz bandwidth)
+  * 8-channel logic analyzer
+  * Data Logger
+  * Dual channel voltmeter
+  * Mixed signal oscilloscopes and logic analyzer
+  * Frequency meter
+  * Remote controller
+  * PWM controller
+  * Frequency generator
+  * I2C controller
+  * Pulse / edge counter
+  * 8 digital channel + 1 analog channel logic analyzer, support for multiple protocols
+  * Analog parameters
+  * Number of input channels: 2 channel
+  * Sampling channel: 1 channel
+  * The maximum sampling frequency: 16MHz
+  * The maximum analog bandwidth: 3MHz
+  * Input voltage range: -10V to + 10V
+  * Sensitivity: 78mV
+  * Maximum vertical resolution: 256 level
+  * Digital parameters
+  * Number of channels: 8
+  * Input voltage: 0V-5.3V
+  * Input Low level: <0.8V
+  * Input high level: >1.4V
+  * Supported protocols: SPI, IIC, UART, SMBus, I2S, CAN, Parallel, Custom, Search, Async, 1-Wite, PS / 2
+  * Communication interface parameters: USB parameters: USB2.0 high-speed 480Mbps
+==== System requirements ====
+  * Supported operating systems Win2000 / XP / Vista / WIN7 (32bit)
+  * Celeron 4 2.0G or Pentium 4 1.8G higher processor
+  * Need USB2.0 high speed interface, does not support full speed USB2.0 or USB1.1
+  * Memory Requirements 128M or more
+  * Need 2G or more hard disk
+  * You need to install Framework 3.5 SP1
+  * Note: If your system is WINDOWS XP, please check whether your computer has ".NET 3.5 SP1" this component, if not, go to the Microsoft website to download and install.
+==== Driver Download ====
+  * http://www.raspberrypiwiki.com/download/arduino/LHT00SU1_Virtual_Oscilloscope.zip
+[source : http://www.raspberrypiwiki.com/index.php/LHT00SU1_Virtual_Oscilloscope_SKU:412961]
+===== Détails =====
+{{:documentation:informatique:instrumentation_connectee:analyseur_logique_lht00su1:noname_lht00su1_pcb_top.jpg?400|}}
+\\
+{{:documentation:informatique:instrumentation_connectee:analyseur_logique_lht00su1:noname_lht00su1_pcb_bottom.jpg?400|}}
 ===== Installation dans SigRok =====
-https://sigrok.org/wiki/Noname_LHT00SU1
+The Noname LHT00SU1 is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate, with 1 additional analog channel (theoretically 2, but only one of them can be used at a time; 3MHz analog bandwidth).
+It is a clone of the CWAV USBee AX-Pro.
+In sigrok, we use the open-source **fx2lafw** firmware for this logic analyzer.
+Note: fx2lafw currently doesn't support switching between the two possible analog channels, 1ACH will be used unconditionally.
+Source : https://sigrok.org/wiki/Noname_LHT00SU1

Outils pour utilisateurs

Outils du site

Différences

Outils de la page