Analyseur Logique LHT00SU1 []

Outils pour utilisateurs

Outils du site


Analyseur Logique LHT00SU1

Analyseur Logique LHT00SU1

Informations

Function

  • Dual input oscilloscope (single, 16Msps, 3MHz bandwidth)
  • 8-channel logic analyzer
  • Data Logger
  • Dual channel voltmeter
  • Mixed signal oscilloscopes and logic analyzer
  • Frequency meter
  • Remote controller
  • PWM controller
  • Frequency generator
  • I2C controller
  • Pulse / edge counter
  • 8 digital channel + 1 analog channel logic analyzer, support for multiple protocols
  • Analog parameters
  • Number of input channels: 2 channel
  • Sampling channel: 1 channel
  • The maximum sampling frequency: 16MHz
  • The maximum analog bandwidth: 3MHz
  • Input voltage range: -10V to + 10V
  • Sensitivity: 78mV
  • Maximum vertical resolution: 256 level
  • Digital parameters
  • Number of channels: 8
  • Input voltage: 0V-5.3V
  • Input Low level: <0.8V
  • Input high level: >1.4V
  • Supported protocols: SPI, IIC, UART, SMBus, I2S, CAN, Parallel, Custom, Search, Async, 1-Wite, PS / 2
  • Communication interface parameters: USB parameters: USB2.0 high-speed 480Mbps

System requirements

  • Supported operating systems Win2000 / XP / Vista / WIN7 (32bit)
  • Celeron 4 2.0G or Pentium 4 1.8G higher processor
  • Need USB2.0 high speed interface, does not support full speed USB2.0 or USB1.1
  • Memory Requirements 128M or more
  • Need 2G or more hard disk
  • You need to install Framework 3.5 SP1
  • Note: If your system is WINDOWS XP, please check whether your computer has “.NET 3.5 SP1” this component, if not, go to the Microsoft website to download and install.

Driver Download

Détails


Installation dans SigRok

The Noname LHT00SU1 is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate, with 1 additional analog channel (theoretically 2, but only one of them can be used at a time; 3MHz analog bandwidth).

It is a clone of the CWAV USBee AX-Pro.

In sigrok, we use the open-source fx2lafw firmware for this logic analyzer.

Note: fx2lafw currently doesn't support switching between the two possible analog channels, 1ACH will be used unconditionally.

Source : https://sigrok.org/wiki/Noname_LHT00SU1

documentation/informatique/instrumentation_connectee/analyseur_logique_lht00su1/index.txt · Dernière modification : de f1sls