Analyseur Logique LHT00SU1 []

Cette page est en lecture seule. Vous pouvez afficher le texte source, mais ne pourrez pas le modifier. Contactez votre administrateur si vous pensez qu'il s'agit d'une erreur.
{{:documentation:informatique:instrumentation_connectee:analyseur_logique_lht00su1:lht00su1_00.jpg?400|}}
====== Analyseur Logique LHT00SU1 ======

===== Informations =====
==== Function ====
  * Dual input oscilloscope (single, 16Msps, 3MHz bandwidth)
  * 8-channel logic analyzer
  * Data Logger
  * Dual channel voltmeter
  * Mixed signal oscilloscopes and logic analyzer
  * Frequency meter
  * Remote controller
  * PWM controller
  * Frequency generator
  * I2C controller
  * Pulse / edge counter
  * 8 digital channel + 1 analog channel logic analyzer, support for multiple protocols
  * Analog parameters
  * Number of input channels: 2 channel
  * Sampling channel: 1 channel
  * The maximum sampling frequency: 16MHz
  * The maximum analog bandwidth: 3MHz
  * Input voltage range: -10V to + 10V
  * Sensitivity: 78mV
  * Maximum vertical resolution: 256 level
  * Digital parameters
  * Number of channels: 8
  * Input voltage: 0V-5.3V
  * Input Low level: <0.8V
  * Input high level: >1.4V
  * Supported protocols: SPI, IIC, UART, SMBus, I2S, CAN, Parallel, Custom, Search, Async, 1-Wite, PS / 2
  * Communication interface parameters: USB parameters: USB2.0 high-speed 480Mbps

==== System requirements ====
  * Supported operating systems Win2000 / XP / Vista / WIN7 (32bit)
  * Celeron 4 2.0G or Pentium 4 1.8G higher processor
  * Need USB2.0 high speed interface, does not support full speed USB2.0 or USB1.1
  * Memory Requirements 128M or more
  * Need 2G or more hard disk
  * You need to install Framework 3.5 SP1
  * Note: If your system is WINDOWS XP, please check whether your computer has ".NET 3.5 SP1" this component, if not, go to the Microsoft website to download and install.

==== Driver Download ====
  * http://www.raspberrypiwiki.com/download/arduino/LHT00SU1_Virtual_Oscilloscope.zip
[source : http://www.raspberrypiwiki.com/index.php/LHT00SU1_Virtual_Oscilloscope_SKU:412961]

===== Détails =====
{{:documentation:informatique:instrumentation_connectee:analyseur_logique_lht00su1:noname_lht00su1_pcb_top.jpg?400|}}
\\
{{:documentation:informatique:instrumentation_connectee:analyseur_logique_lht00su1:noname_lht00su1_pcb_bottom.jpg?400|}}

===== Installation dans SigRok =====
The Noname LHT00SU1 is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate, with 1 additional analog channel (theoretically 2, but only one of them can be used at a time; 3MHz analog bandwidth).

It is a clone of the CWAV USBee AX-Pro.

In sigrok, we use the open-source **fx2lafw** firmware for this logic analyzer.

Note: fx2lafw currently doesn't support switching between the two possible analog channels, 1ACH will be used unconditionally.

Source : https://sigrok.org/wiki/Noname_LHT00SU1
Outils pour utilisateurs

Outils du site

Outils de la page
