Différences

Ci-dessous, les différences entre deux révisions de la page.

--- documentation:microcontroleurs:arduino:modules:49e_hall_effect:index [2021/08/02 17:20] – f1sls
+++ documentation:microcontroleurs:arduino:modules:49e_hall_effect:index [2021/08/03 07:06] (Version actuelle) – [CODE] f1sls
@@ Ligne 7: / Ligne 7: @@
 ==== MODULE WITH OPAMP ====
 {{:documentation:microcontroleurs:arduino:modules:49e_hall_effect:linear-hall-effect-sensor-module-schematic.jpg?direct&600|}}
+===== ARDUINO WIRING =====
+{{:documentation:microcontroleurs:arduino:modules:49e_hall_effect:49e_arduino_wiring.jpg?direct&600|}}
 ===== DOCUMENTATIONS =====
   * {{ :documentation:microcontroleurs:arduino:modules:49e_hall_effect:ss49e_secelectronics.pdf |SS49E Datasheet}}
-----
+===== CODE =====
+<code cpp>
+// -------------------------------------
+// 49E Hall Effect Sensor - Code Example
+// -------------------------------------
-====== (AH)44E HALL EFFECT SENSOR ======
+const int pinHall = A0;
+void setup() {
+  pinMode(pinHall, INPUT);
+  Serial.begin(9600);
+}
+void loop() {
+  //we measure 10 times adn make the mean
+  long measure = 0;
+  for(int i = 0; i < 10; i++){
+      int value =
+      measure += analogRead(pinHall);
+  }
+  measure /= 10;
+  //voltage in mV
+  float outputV = measure * 5000.0 / 1023;
+  Serial.print("Output Voltaje = ");
+  Serial.print(outputV);
+  Serial.print(" mV   ");
+  //flux density
+  float magneticFlux =  outputV * 53.33 - 133.3;
+  Serial.print("Magnetic Flux Density = ");
+  Serial.print(magneticFlux);
+  Serial.print(" mT");
+  delay(2000);
+}
+</code>
+<code cpp>
+/*
+Analog 49E Hall Effect sensor test
+Basic code for reading the analog output of the 49E hall effect sensor.
+Sensor is connected to A0, but can be any analog input pin.
+*/
+const int AnalogPin = A0;
+const float GAUSS_PER_STEP = 2.57;  // Sensor outputs approx 1.9mV / Gauss.
+                                    // ADC step is about 4.89mV / Step for 5V operation.
+float rawValue = 0.0;               // Raw ADC Reading
+float gaussValue = 0.0;
+float zeroLevel = 518.0;  // Adjust value as needed to get zero rawValue output with no magnetic field.
+//===============================================================================
+//  Initialization
+//===============================================================================
+void setup()
+{
+  pinMode (AnalogPin, INPUT);
+  Serial.begin(9600);         // Set comm speed for debug window messages
+}
+//===============================================================================
+//  Main
+//===============================================================================
+void loop()
+{
+  rawValue = analogRead (AnalogPin) - zeroLevel;  // Output normalized to '0' with no field present
+  Serial.print ("Reading Raw: ");
+  Serial.println (rawValue);
+  // Reading positive relative to the South Pole, the North Pole negative
+  gaussValue = rawValue * GAUSS_PER_STEP;
+  Serial.print ("Reading in Gauss: ");
+  Serial.println (gaussValue);
+  delay (3000);
+}
+</code>
+\\
+\\
+----
+\\
+\\
+====== (31)44E HALL EFFECT SWITCH MODULE (AKA "KY-003") ======
 {{:documentation:microcontroleurs:arduino:modules:49e_hall_effect:44e402_module.jpg?direct&600|}}
+{{:documentation:microcontroleurs:arduino:modules:49e_hall_effect:a3144-hall-effect-sensor-pinout.jpg?direct&400|}}
+===== SPECIFICATIONS =====
+  * Model : KY-003
+  * Operating Voltage : 5 VDC
+  * Supply Voltage, VCC : 28 V
+  * Reverse Battery Voltage, VRCC : -35 V
+  * Magnetic Flux Density, B : Unlimited
+  * Output OFF Voltage, VOUT : 28 V
+  * Reverse Output Voltage, VOUT : -0.5 V
+  * Continuous Output Current, IOUT : 25 mA
+  * Operating Temperature Range : -40°C to 85°C
+  * Storage Tempereture Range : -65°C to 170°C
+  * Length : 19mm
+  * Width : 15mm
+===== FEATURES =====
+  * 4.5 V to 24 V Operation ... Needs Only An Unregulated Supply
+  * Open-Collector 25 mA Output ... Compatible with Digital Logic
+  * Reverse Battery Protection
+  * Activate with Small, Commercially Available Permanent Magnets
+  * Solid-State Reliability
+  * Small Size
+  * Resistant to Physical Stress
 ===== DOCUMENTATION =====
+  * {{ :documentation:microcontroleurs:arduino:modules:49e_hall_effect:3144_hall_datasheet.pdf |}}
   * {{ :documentation:microcontroleurs:arduino:modules:49e_hall_effect:oh44e-e_sensore-hall.pdf |}}
   * https://github.com/R2D2-2017/R2D2-2017/wiki/Keyes-44E402-Magnetic-Hall-Switch-Sensor

Outils pour utilisateurs

Outils du site

Différences

Outils de la page